As far as the quick-cooling and quick-heating mold temperature machine is concerned, it will actually become the quick-cooling and quick-heating high-gloss mold temperature machine. In terms of its work, it actually uses high-temperature steam directly. Next, we actually need to pay attention to it. In fact, it will directly make a balanced heating channel on the mold. When injection molding After the mold is closed, high-temperature steam is actually blown in.

First of all, in fact, we will directly increase the mold temperature of the mold temperature machine to a set value. Next, for the injection of plastic into the mold cavity, for the injection molding machine, it is actually the same After the holding pressure is transferred to cooling, we actually should pay attention to the need to start pouring cold water, and the mold temperature will actually drop to a set value relatively quickly to open the mold and complete the entire injection process.

When the mold temperature machine is in thick-wall molding, in terms of its injection cycle, it can actually be directly reduced by more than 70%. In this respect, it is actually able to enhance the fluidity of the plastic and its filling. The effect, moreover, it actually means that 95% of the heat energy can be recovered, and 100% of the medium can actually be recovered.

In fact, the mold temperature machine directly improves the finish on the surface of the product. It is because of this that it can actually achieve a mirror effect by making the surface finish directly. It completely solves the problem that the boiler steam cannot be recovered and the energy consumption is relatively large.

In fact, the volume of the mold temperature machine is actually relatively small. It can be moved at any time to match the use on different machines. As far as 180°C hot water is concerned, it can actually completely replace the environmentally friendly phenomenon on the boiler. . In the thin-wall molding of the mold temperature machine, its high-gloss injection molding actually helps to improve the fluidity of injection molding. Then, in fact, it can improve the quality of the product itself and its strength.